Thursday, September 29, 2011
Brother TN-450 Toner – Replace Toner, I just replaced it
Brother TN-450 Toner – Replace Toner, I just replaced it
If you have just replaced the toner and the machine is still telling you to replace the toner. It quite likely the toner sensor flag on the side of the toner has not been “tripped” to recognize another toner has been replaced.
Check to ensure that the dial on the left side of the cartridge is in the position as illustrated in the image below. If not, turn the dial counter clockwise until it matches the position in the image. If not, turn the dial counter-clockwise until it matches the dial position in the image. It is imperative that this dial be locked into position as illustrated to ensure that the printer detects that a new cartridge has been installed and resets the “REPLACE TONER” mode.
Check to make sure that the printer is powered up during the entire process. Changing the cartridge with the printer powered off will not reset the “REPLACE TONER” mode. In the event that the printer is powered off when the cartridge is installed, you will need to remove the cartridge and repeat step one before reinstalling the cartridge.
Put the new toner cartridge firmly into the drum unit you hear and feel it lock into place. If installed successfully, the green lock lever will lift automatically.
Subscribe to:
Post Comments (Atom)
Posts
Kodak Inkjet Cartridges
ReplyDeleteGreat article and your blog template are so cool.
what should you do if the dail doesn't move?
ReplyDeleteHi, very helpful information is there any other information about cheap ink i will apreciate it thanks in advance
ReplyDeleteompatible and remanufactured toner cartridges are a great way for you to instantly reduce your printing expense. However, make sure you are purchasing remanufactured toner cartridges from a reliable source or they could end up costing you time and aggravation for poor quality.
ReplyDeleteThanks, that was a really cool read!
ReplyDeletefax machine